• Disk-based IRIG 106 Chapter 10 Telemetry Recording and Reproduction
• MIL-STD-1553, PCM, VIDEO, and Time Code Recording
• PCM, Video, and Time Code Reproduction
• Distributed Fault-Tolerant Architecture
• Rack-mount Linux-based Realtime Acquisition Chassis – uses same backplane, controller, and I/O modules as Airborne 2300V1 recorder
• Multiple Acquisition Chassis can share common 10MHz time stamp clock for precise time correlation across virtually unlimited number of channels
• Host Windows-based Workstaton for Setup, Command & Control, & Data Visualization – Ethernet and/or COM setup, control, and status
• Simultaneous Data Recording to Media and Data Streaming to Host Workstation
• Removable (shuttle) Disk Primary Storage Media
• DVD and/or AIT Tape Offline Archive Storage Media
• Live Data Visualization on Host Workstation 

SPECIFICATIONS  

• 4U Rackmount Acquisition & Replay Chassis (ARC)
• 95 – 240VAC 50 – 60 Hz input voltage
• Front touch-screen control & status panel
• Rear I/O connector manifold
• Each ARC can support one or two 5-slot I/O subsystems
• Each ARC subsystem has a build-in IRIG A, B, or G reader/generator and Chapter 10 time code input/output channel – does not use one of the five I/O slots
• Each I/O slot can support one of the following modules
• 4 or 8 Dual-Redundant (A/B) MIL-STD-1553 Input Channels
• 4 or 8 PCM/UART Input Channels
• 4 or 8 PCM/UART Output Channels
• 4 Video+Audio Input Channels
• 4 Video+Audio Output Channels
• Each PCM/UART Input Channel Supports:
• 1Kb/s to 32Mb/s NRZ-L or RNRZ data with 0-degree or 180-degree clock
• 1Kb/s to 10Mb/s NRZ-L, RNRZ, Bi-phase, or Miller without clock (built-in bit-sync per channel)
• Watch-word validation – the user can specify a repeating value at a specific location for realtime monitoring
• 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 BAUD Async Serial with Even, Odd, or No parity and 1 or 2 stop bits
• Each PCM/UART Output Channel can reproduce one recorded input channel
• Phase coherent simultaneous reproduction of Multiple PCM/UART Output Channels
• Each Video+Audio Input Channel supports:
• Chapter 10 Format 0 MPEG2 compression from 2 to 15 Mbits per second
• Common audio input (per ARC) or dedicated (private) audio input
• 1 millisecond precision time or date-time overlay which the user can position anywhere on the screen 
• Each MIL-STD-1553 Input Channel Supports Monitor-mode with watch-word validation 

SOFTWARE (provided)  

• Chapter 10 TMATS Builder / Loader to setup systems
• Chapter 10 Data Validator checks packet structure, header and data checksums
• Chapter 10 Data Validator can split composite file into separate channel files
• Chapter 10 Data Validator can strip Chapter 10 artifacts from video channels, producing industry standard MPG files that can be viewed with Wndows Media Player

SOFTWARE (optional)  

• JDA Multi-Channel Synchronized Video Replay Program
• CALCULEX Tabular and Strip Chart Data Visualization Program
• IRIG 106 Chapter 6 (ARMOR) to IRIG 106 Chapter 10 Conversion Program